Operating And Handling - i-like Metaphysik sinus 5 GO Beschreibung

3. Operating and handling

Settings for bringing the device
into service
1. Before using the sinus 5 GO for
the first time, it must be charged.
Take the charging cable and plug
it into the sinus 5 GO. Then plug
the other end of the cable into a
suitable USB socket of a mains
plug or device with a power supply
(e.g. computer).
2. As soon as the charging function
starts, the light on the front of
the housing flashes red once per
second. The sinus 5 GO is now in
charging mode. When the battery
is charged, the colour of the light
signal changes to green and
flashes green once per second.
The sinus 5 GO is now charged.
3. If you remove the charging cable,
the light signal changes again
and flashes green once every 12
seconds. The sinus 5 GO is now
switched on.
20 sinus 5 GO