Switching Off - i-like Metaphysik sinus 5 GO Beschreibung

Effective radius
After successful connection, the operating range of a sinus 5
GO is at least 5 meters.
Switching on
The device is switched off when no light signal is visible. In this
case the battery is empty (deep discharge protection for the
battery is integrated). To switch on the sinus 5 GO, plug the
charging cable into the device. Then plug the other end of the
cable into a suitable USB socket of a mains plug or device with a
power supply (e.g. computer). As soon as the charging function
starts, the light on the front of the housing flashes red once
per second. The sinus 5 GO is now in charging mode. When
the battery is charged, the colour of the light signal changes to
green and flashes green once per second. The sinus 5 GO is
now charged. If you remove the charging cable, the light signal
changes again and flashes green once every 12 seconds. The
sinus 5 GO is now switched on.

Switching off

The device is switched on when a green light signal lights up
approx. every 12 seconds. The sinus 5 GO remains switched
on until the battery is used up. Then the sinus 5 GO switches off
automatically.
Battery charge and light signals
When the sinus 5 GO is switched on and charged, a green light
signal lights up once every 12 seconds. If the battery level is
low, the light signal flashes twice every 12 seconds. If the sinus
5 GO is not charged in spite of a low battery level, it switches
off automatically when the battery is empty (integrated deep
discharge protection for the battery). Please charge the battery
with the charging cable supplied. To do this, plug one end of
22 sinus 5 GO