Operating And Handling - i-like Metaphysik sinus 25 Bedienungsanleitung

3. Operation and handling
Settings for getting started
1. Take the sinus 25 Room-Converter out of its
packaging and place it on a clean and level
surface so that it stands stable. Take the
power supply unit and plug one end into the
back of the sinus 25 Room-Converter and
the other end into the power outlet.
2. Unpack the "e-smog" sinus Converter. Insert
the sinus Converter into the opening on the
front of the sinus 25 Room-Converter, and
push the converter all the way to the stop.
Important: The sinus Converter must be
plugged into the sinus 25 Room-Converter
with the three golden strips facing upwards.
If you have placed the sinus Converter cor-
rectly, the labelling is easily readable from
the outside.
3. To switch on the sinus 25 Room-Converter,
press the button on the back of the housing.
When the sinus 25 Room-Converter is acti-
vated, a light around the on/off button is illu-
minated.
Customisable frequency
With the sinus 25 Room-Converter, you have the possibility to activate different
frequency patterns according to your individual needs. The different frequencies
are plugged directly into the slot provided with a sinus Converter. The program-
med frequencies are thus emitted in the effective radius of the sinus device.
Each sinus 25 Room-Converter has three slots
for the sinus Converters. Two sinus Converters
can be placed per slot. In total, the sinus 25
Room-Converter has a capacity of six different
sinus Converter frequencies.
e-smog
sinus 25 Room-Converter
9