2.2 Einbau
Sie können den Decoder mit
den beiliegenden Schrauben
befestigen. Beachten Sie aber
hierbei unbedingt, das Sie mit
dem Schraubenkopf kein Kabel
beschädigen! Die Ränder können
bei Bedarf abgebrochen werden.
Abbildung 2: Anschluss am LGB
Illustration 2 : Hook-up at LGB
2.2 Installation
GRÜN = MOTOR -
BRAUN = GLEIS -
WEIß = GLEIS +
GELB = MOTOR +
®
Getriebe
®
motor block
The decoder may be mounted
with the screws provided. To
minimize the size of the decoder
the rims may be snapped off.
GREEN = MOTOR -
BROWN = TRA CK -
WHITE = TRACK +
YELLOW = M OTOR +
7