Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1
2
3
1
104
EN
Product overview
1x
1
Square drive tool holder
2
R-trigger (reverse)
3
F-trigger (forward)
4
Gear box
5
Motor housing
6
Main handle
7
Power cord
4
5
6
Intended use
The tool is intended for driving in and loos-
ening screws, bolts and nuts within the re-
spective range of dimension. The tool is not
7
intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
DE
Lieferumfang
FR
Etendue de livraison
IT
Materiale compreso nella fornitura
NL
Leveringsomvang
SV
CONNECT POWER CORD
Leveransomfång
1
Plug the power cord
CZ
wall socket.
Rozsah dodávky
SK
Rozsah dodávky
RO
Volumul livrat
GB
Scope of delivery
Using the tool
4x
1. Fit the required impact socket to the
square drive tool holder 1.
2. Make sure your workpiece can not slip.
3. Hold the tool firmly and start working by
pressing either the F-trigger
ger 2, depending to the desired rotation
17
19
direction.
4. To remove the impact socket firmly pull it
from the square drive tool holder 1.
7
into a suitable
3
or R-trig-
21
22
EN
105
Werbung
Inhaltsverzeichnis
