Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions - nedis ANIR1504BK700 Kurzanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 7
ANIR1504BK700_MAN_COMP_print_1022.indd 5
ANIR1504BK700_MAN_COMP_print_1022.indd 5

Safety instructions

-
WARNING
• Ensure you have fully read and understood the instructions
in this document before you install or use the product. Keep
the packaging and this document for future reference.
• Only use the product as described in this document.
• Do not use the product if a part is damaged or defective.
Replace a damaged or defective product immediately.
• Do not drop the product and avoid bumping.
• This product may only be serviced by a qualified technician
for maintenance to reduce the risk of electric shock.
• Do not expose the product to water or moisture.
• Do not throw away this product with other household
waste.
• There are no user serviceable parts. Do not open the
housing.
• Keep the product out of reach from children, infirm persons
or animals.
• Check the product regularly for signs of damage, when
damaged do not use the product any longer and return the
product to the supplier.
• Keep the product away from heat sources. Do not place the
product on hot surfaces or near open flames.
• Do not place the product under any mechanical stress.
• Do not expose the product to a high level of vibrations.
Operation instruction
For the best reception, please check the following conditions:
• Keep the antenna away from the sources of interference:
keep the antenna away from those big power consumption
devices, such as air conditioner, elevator, hair dryer and
microwave oven.
• Place the antenna near windows when using the antenna in
indoor environment.
• Install the antenna as high as possible: In digital terrestrial
reception, interceptions between antenna and transmission
tower will cause signal loss temporarily. Please install the
antenna as high as possible to reduce interceptions.
Installation 1: powered by DTV set-top-box
Please be noticed, in this installation, you need to make
4
sure that your set-top-box can support coaxial cable 5V DC
powering via the IEC or F connector to antenna.
1. Take out the antenna main unit and accessories from box.
2. Connect the coaxial cable with antenna and DTV
set-top-box.
5
10-10-2022 08:30:30
10-10-2022 08:30:30

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis