Cycle2Charge V3 Plus Bedienungsanleitung Seite 17

 Thread the cable so far through the head tube that the
white plug is approx. 3 cm outside the head tube.
 Run the cable coming out of the head tube parallel to
the existing cable of the front light down to the hub
dynamo. The final cable fixation with the cable ties
should be the very last assembly step.
The following description is made for a Shimano hub
dynamo. If you use a different brand please follow the
assembly steps of the dynamo manufacturer.
Bedienungsanleitung / User Manual Cycle2Charge Rev08 17/28