9. Backup Battery Installation
Use a screwdriver to open the battery compartment cover at the bottom. Put your
LR14 batteries inside (note the positive and negative poles), replace the cover and
tighten the screws.
Note: You need to buy the batteries separately and only alkaline dry batteries are
supported. Before installing, make sure that there is nothing in the battery
compartment. Install batteries for emergency backup in case of power failure. If the
batteries are not used for a long time, please remove the battery.
Quick Setup
1. Scan the QR code on the right and download the Petoneer App which is available on
App Store and Google Play. Click Sign up to get walked through to create your
Petoneer account.
2. Power on and ensure the Wi-Fi Indicator LED is flashing slowly, reflecting the device
is ready for joining the Wi-Fi. Open the Petoneer App and click the '+' button and get
walked through the SET-UP steps.
Notice: The feeder doesn't support the 5GHz Wi-Fi, please make sure your Wi-Fi is 2.4G.
If the Wi-Fi indicator is not blinking slowly after power-on, please long press
and hold the manual feed button until the indicator blinks slowly.
8