Frequent Troubleshooting; Technical Features; Functions - Tekno Point inosens CS-UMIDY Gebrauchs- Und Installationshandbuch

ENGLISH

Frequent troubleshooting

Problem
Lack of ventilation or misting
Poor nebulization
Abnormal odor
Abnormal sound
The atomized liquid goes around
the outlet nozzle

Technical features

Product name
Template
Voltage
Power
Evaporation
Capacity

Functions

1. Automatic shutdown when the tank is empty
2. Adjustable nebulization
3. Top filling
4. With trundle
5. Continuous humidification
TEKNO POINT ITALIA S.R.L. - VIA DELL'ARTIGIANATO 5 - 30020 MARCON (VE) – ITALY
COMMERCIALE@TEKNOPOINT.COM –
MUI_CS-Umidy_Ita_Eng_Fra_Deu_TP/Rev.00/Data 28.09.2020
Cause
The plug is not inserted correctly
No power
Lack or insufficient quantity of
water in the tank
Excessive dirt layer on the
atomizer sheet or dirty water
New machine
Water that is not clean or has
been left in the tank for too long
The water tank is not installed
correctly
Resonance caused by insufficient
amount of water
Resonance caused by unstable
table
Humidifier
HQ-JS825
100V-240V 50Hz / 60Hz
100W
1800 ml / H
15L
14
Solution
Insert the plug correctly
Turn on the machine
Fill the water tank
Clean the atomizer sheet and
change the water in the tank
Open the water tank and leave it
open in a cool, dry place for 12
hours
Clean the tank and change the
water
Install the water tank correctly
Fill the tank with an adequate
amount of water
Place the device on a stable
surface
WWW.TEKNOPOINT.COM