Wellis Mariner WZ00086 Aufbauanleitung Seite 8

| 8 |
Important!
– The temperature of the water that is in contact with the product and intended for human
consumption must not exceed 65°C for health reasons.
– Use: domestic hot water supply.
– After installation and before the first use, as well as if used regularly, it is advisable to rinse
the product before consumption. After the installation, we recommend rinsing the product for
5-5 minutes with cold, respectively hot water. It is necessary to run at least 1-2 litres of water
before consumption. The water obtained during the first rinse should not be used for cooking or
as drinking water.
– Considering that hot water increases metal solubility, it is recommended to use cold water for
drinking and heat it up when used for cooking.
– The flexible tap connectors used for connecting the products must be registered products.
– It is recommended to descale and disinfect the shower head of the faucets on a monthly
basis. For the purposes of cleaning and disinfecting the faucets, only chemicals that meet the
requirements of Gov. Decree 201/2001. (X.25) and Joint Decree 38/2003. (VII.7) ESzCsM-FVM-
KvVM should be used.
– Due to its principles of operation, the shower head creates significant amount of aerosol, thus
posing an increased risk of Legionella exposure. Therefore its use is not recommended in the
rooms of healthcare facilities, or any other location where the number of Legionella colony
forming units/liter in the cold and/or domestic hot water reaches the limit determined in
Ministerial Decree 49/2015 (XI. 6.).
| EN |