G21 Inovation Bedienungsanleitung Seite 9

Troubleshooting
Fault phenomenon
The product is not
working
Fan does not rotate
Food materials not
fully fried
Food materials not
fully steamed
The fried food
ingredients are not
crispy
White smoke comes
out
Steam escaped from
the outside of the
machine
Troubleshooting
Fault phenomenon
"E01"
"E02"
"E03"
"E04"
"E05"
Reason analysis
The power unplugged.
Loose internal wires.
The machine is not
connected.
Motor damage or short circuit
of other components.
Placed too many food
materials on the grid.
The set temperature is too
low.
Baking time is too short.
Placed too many food
materials on the grid.
Steaming time is too short.
Traditional fried ingredients
are not used.
Baking greasy food materials.
There is still a residue of
grease in the fryer from the
last baking.
The head of the machine is
not properly covered.
Seal failure.
Reason analysis
The cavity thermostat is open. Contact G21 Authorized Service.
The cavity temperature
sensor short-circuited.
The boiler temperature sensor
is open.
The boiler temperature sensor
has short-circuited.
Abnormal power panel zero-
crossing module.
Trouble removal
Plug the power cord into the ground
socket.
Contact G21 Authorized Service.
Start working after plugging into the
power plug.
Contact G21 Authorized Service.
If there are too many food materials,
put them on the grid in batches.
Set the temperature control knob to
the desired temperature.
Extend cooking time.
If there are too many food materials,
put them on the grid in batches.
Extend cooking time.
Suitable fried snacks can be used.
For non-oil food materials, a layer of
oil can be brushed on the surface of
the food.
It is a normal phenomenon that there
will be a lot of smoke leakage when
cooking greasy food.
Be sure to clean the fryer after each
baking.
Cover the machine head in place.
The lid seal is inserted upside down,
remove it and insert it correctly.
Trouble removal
Contact G21 Authorized Service.
Contact G21 Authorized Service.
Contact G21 Authorized Service.
Contact G21 Authorized Service.