Shipment And Repositioning; Transportation And Changing Positioning - Blaupunkt 5FG228FE0 Bedienungsanleitung

• When defrosting frozen foods, food
should be wrapped in several layers
of paper and kept in a cool place. The
inevitable rise in temperature will shorten
its storage life. Remember to use this
food within a relatively short period of
time.
• Set the thermostat knob to position "•"
and switch off the appliance.
• Leave the door open to accelerate
defrosting. Remove any water from the
compartment.
This appliance has a special drain
system.
1. Pull out the bottom drawer
freezer compartment. Put it on the floor
and align it to the front of the cabinet.
2. Pull out the drain pipe
back wall of the freezer compartment.
Then, place it in the groove on the front
side of the appliance floor.
3. If there is still water on the freezer floor,
you can remove it using a sponge.
• Clean the interior by hand with lukewarm
water and a little detergent. Never use
abrasive products or aggressive cleaning
agents.
• Dry the inside of the unit, connect it to
the mains and set the thermostat knob
to position "5". After 24 hours, reset the
thermostat to the desired position.
of the
(A)
, located on the
(B)
EN - 35
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
• The original packaging and foam may be
kept for re-transportation (optional).
• Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
• Remove all movable parts or fix them
into the appliance against shocks
using bands when re-positioning or
transporting.
Always carry your appliance in the
upright position.