Operating Your Radio - Fm - Sangean DPR-99+ Bedienungsanleitung

Operating your radio - FM

1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The display will
show "Welcome to Digital Radio" for a few seconds.
3. Press the Band button to select the FM band.
4. Press and release the Select button until the display shows "Auto
tune <>".
5. Press the Tuning Up button to cause your radio to scan in an
upwards direction (low frequency to high frequency) and stop
automatically when it finds a station of sufficient strength.
6. After a few seconds the display will update and show station name (if
RDS information is available).
7. Press the Tuning Down button to scan the FM band in a downwards
direction (high frequency to low frequency).
8. When the waveband end is reached your radio will recommence
tuning from the opposite waveband end.
9. Adjust the Volume control to the required setting.
10. To switch off your radio press the On/Off button.
GB
12