Setting The Time And Date; Setting The Sleep Timer - Kenwood CR-M30DAB-W Bedienungsanleitung

5.6 Setting the time and date

When receiving a DAB + or FM station in sufficient qualit , the clock will be set automatically. Depending
on the reception strength, this process may take some time. If no corresponding station is available, you
can also set the time manually:
1. Switch on the radio and call up the menu with <MENU/INFO> button.
2. Using the <TUNE+/-> button or the volume control, select the "Time/Date" menu and confir .
3. Select "Set time and date" and confirm. Finall , select, set and confirm Da , Month, Year, Hours and
Minutes.
Additional settings in the "Time/Date" menu
The following functions can be set in the "Time/Date" menu:
"Set Hour system": Setting the time format.
Choices: "24 hours system" / "12 hours system"
"Set Date Format": Setting the date format.
Choices: "dd-mm-yyyy" / "mm-dd-yyyy / yyyy-mm-dd"
"Clock style": Setting the Clock design in the Standby mode.
Choices: "Analogue" / "Digital"
"Auto. Update": Setting for automatic time setting.
Choices: "No Update" / "Update from Radio"
5.7 Setting the display illumination
The display illumination can be programmed in 3 brightness levels. The following settings can be made in
the "Backlight" menu:
"Timeout": Time, until the background light of the display is switched off.
Choices: "Always On / 10 sec. / 20 sec. / 30 sec. / 45 sec. / 60 sec. / 90 sec. /
120 sec. / 180 sec."
In the "Always On" mode the background light is not switched off. This shortens the battery life.
"Level": Brightness of the display when the radio is switched on.
Choices: "Low" / "Medium" / "High"
For adjustment, please proceed as follows:
1. Switch on the radio and call up the menu with <MENU/INFO> button.
2. Using the <TUNE+/-> or the volume control select the "Backlight" and then press <ENTER/SCAN>.
3. Using the <TUNE+/-> buttons or the volume control select the "Timeout" or "Level" menu and
confirm with <ENTER/SCAN>.

5.8 Setting the sleep timer

The sleep timer is used to automatically turn off the radio after a preset period of time. For adjustment,
please proceed as follows:
1. Switch on the radio and call up the menu with <MENU/INFO> button.
2. Using the <TUNE+/-> or the volume control select the "Sleep" and then press <ENTER/SCAN>.
3. In the following menu please choose from the following options: "Off / 15 min. / 30 min. / 45 min.
10