Safety Information - 3M 26840 Bedienungsanleitung

SAFETY INFORMATION

Please read, understand, and follow all safety information contained in these instructions prior to
the use of this Spray Gun Rebuild Kit. Retain these instructions for future reference.
Intended Use:
This Rebuild Spray Gun Kit is intended to rebuild the 3M Performance Spray Gun which is used in
automotive, industrial, and consumer finishing applications. It is expected that all users be familiar with
the safe handling of this Spray Gun Rebuild Kit. Use in any other application has not been evaluated by
3M and may lead to an unsafe condition.
Indicates a hazardous situation which, if not avoided, could result in serious injury
WARNING:
or death
Indicates a hazardous situation which, if not avoided, could result in minor or
CAUTION:
moderate injury and/or property damage.
NOTICE:
Indicates a situation which, if not avoided, could result in property damage only.
• To reduce the risks associated with chemical exposure, hazardous pressure, fire/explosion, or
environmental contamination:
- Read, understand and follow all safety statements in this manual and the Performance Spray Gun
Kit user's manual to avoid possible safety hazards.
- Never perform unapproved modifications or maintenance on this product.
• To reduce the risks associated with fire and explosion:
- Users are expected to comply with local regulations for working in explosive environments and
any requirements for the material to be sprayed (consult material SDS) and use appropriate PPE
for both. [Note: This may include grounding with shoes, heel straps, and static conductive (or
static dissipative) gloves.]
• To reduce the risks associated with chemical exposure, hazardous pressure and impact:
- Do not maintain or service the spray gun other than as instructed in the user's manual.
- Ensure that all fasteners are replaced and tightened before operation.
• To reduce the risks associated with chemical exposure and hazardous pressure:
- Before use check spray equipment for damage and proper function. Repair/replace worn,
damaged or malfunctioning components with 3M approved components.
• To reduce the risks associated with bursting and chemical exposure:
- Prior to maintenance, disconnect air and liquid pressure source from the spray gun.
- Always follow required air and liquid pressure relief procedures for relieving air and liquid
pressure from the spray equipment.
• To reduce the risks associated with sharp points:
- Do not touch the sharp end of the fluid needle when exposed and handle fluid needles carefully
during replacement.
- Dispose of device components in accordance with local laws and regulations.
- Ensure equipment is stored indoors at room temperature.
Explanation of Signal Word Consequences
Read Warnings and Instructions
WARNING
CAUTION
NOTICE
1