Philips Airfryer L Connected HD9255 Bedienungsanleitung Seite 14

ENGLISH
14
8 Press the On/Off button to start the cooking process.
Note
During cooking the temperature and time are shown alternately.
•
The last cooking minute counts down in seconds.
•
Refer to the food table with basic cooking settings for different types
•
of food.
When the cooking process is started and your Airfryer is paired with
•
your smart device, you can see, control and change the cooking
parameters also in the NutriU app.
Tip
During cooking, if you want to change the cooking time or
•
temperature, press the corresponding up or down button at any time
to do so.
To pause the cooking process, press the On/Off button. To resume
•
the cooking process, press the On/Off button again to continue the
cooking process.
The device is automatically in pause mode when you pull out the pan
•
and the basket. The cooking process continues when the pan and the
basket are put in the appliance again.
To change the temperature unit from Celsius to Fahrenheit or the
•
other way around on your Airfryer, press the temperature up and
down button at the same time for about 10 seconds.
Note
If you do not set the required cooking time within 20 minutes, the
•
appliance automatically shuts off for safety reasons.
Some ingredients require shaking or turning halfway through the
•
cooking time (see "Food table"). To shake the ingredients, pull out the
pan with the basket, place it on a heat resistant work top, slide the lid
and press the basket release button to remove the basket and shake
the basket over the sink. Then put the basket into the pan, and slide
them back into the appliance.
9 When you hear the timer bell, the cooking time has
elapsed.
Note
You can stop the cooking process manually. To do this, press the On/
•
Off button.