Removing Battery - Zelmer ZGK6500 Benutzerhandbuch

EN PL

REMOVING BATTERY

The appliance must be disconnected from
the supply mains when removing the bat-
tery
Ensure that the clipper is discharged of all power First remove the comb. Then remove
the blade.
Unscrew the 2 screws in the blade base of the unit. Unscrew the other screw on the lower
back housing of the clipper. Lift or pry the clipper halves apart, exposing the battery.
Cut the metal pieces on both ends of the battery and remove it from the PCB. Pull down-
ward the battery set from the unit.
The battery must be removed from the
appliance before it is scrapped. The bat-
tery is to be disposed of safety.
We hope that you will be satisfied with this product.
13