COLUMBIA VAC WKC20 Bedienungsanleitung Seite 9

GENERAL DESCRIPTION
1. On/off switch (speed,
operation modes)
2. Handle
3. Air inlet grille
4. Air outlet grille
5. Body
6. Base
7. Fixing nut
TECHNICAL DATA
power: 45W
supply voltage:
220-240V ~ 50Hz
INSTALLATION
After unpacking the device, make sure that it has not suffered any damage during transport.
In the case of any doubt, do not use the device and contact a servicing centre.
Before first use, unpack the device and assemble its components.
- loosen the nut (7)
- lead the cable between the base (6) parts and connect them photo 3
- attach the base (6) to the fasteners in the body and tighten the nut (7) photo 2
- lead the cable out of the base (6) through the groove to make the device stable.
OPERATION OF THE DEVICE
- place the device on a flat and stable surface,
- set the switch (1) to "0"
- connect the fan to the mains with parameters compliant with those provided in the
instruction,
- to turn the device on, select the mode and speed of operation by rotating the knob (1):
1 2 3
1 2 3
- to turn off, rotate the knob back to "0"
INSTRUCTION MANUAL
photo 1
5
4
6
- with oscillations
- without oscillations
COLUMN FAN WKC20
photo 2
3
2
1
6
photo 4
EN
photo 3
6
photo 5
7
9