MAXXMEE 07850 Gebrauchsanleitung Seite 19

Steam Ironing Station
The iron must be used and placed down on a
■
flat stable surface.
When the iron is placed on the storage device,
■
care must be taken to ensure that the surface
on which the storage device is placed is stable.
The iron must not be used if it has been
■
dropped, shows visible signs of damage or
leaks.
Do not make any modifications to the device.
■
Also do not replace the connecting cable
yourself. If the device or the connecting cable
of the device are damaged, they must be re-
placed by the manufacturer, customer service
department or a similarly qualified person (e.g.
specialist workshop) in order to avoid any haz-
ards.
Allow the iron to cool down completely before
■
the water tank is emptied and / or the device
is cleaned and stored away.
DANGER – Danger of Electric
Shock
■
Use and store the device only in
closed rooms.
■
Do not use the device in rooms with
high humidity.
■
Never immerse the device (apart from
the water tank) and the connecting
cable in water or other liquids and
ensure that these components cannot
fall into water or become wet.
07850_de-en-fr-nl_A5_V1_1.indb 19 07850_de-en-fr-nl_A5_V1_1.indb 19
■
If the device falls into water while it is
connected to the mains power, pull
the mains plug out of the plug socket
immediately. Only after this should
you retrieve the device from the
water. Never attempt to pull it out of
the water while it is connected to the
mains power!
■
Never touch the device and the con-
necting cable with wet hands when
the device is connected to the mains
power.
EN
19
10.06.2020 13:54:03 10.06.2020 13:54:03