Motion CM-17 Handbuch Seite 8

Pair a remote
3
Shortly press the program button on the motor. The blind will start
3.1
stepping, indicating that program mode has been activated.
(The blind keeps stepping until the program mode is deactivated)
Select a desired channel for the blind by pressing 1 of the 4 channel buttons
3.2
on the remote control.
Press the pair button on the back of the remote control to pair the blind
3.3
with the selected channel.
The blind will shortly stop stepping, indicating that the remote has been
paired to the blind.
3. PAIR A REMOTE