Battery Charging - AgfaPhoto Realimove KM800 Benutzerhandbuch

MotIoN dEtEctIoN
With the motion detection function on,
the dashcam automatically starts
recording when it detects something
move in front of it. If there is no movement
for a while, the dash cam stops recording
automatically.
fILE ProtEctIoN
Protected files cannot be deleted
on the camera, but can be deleted
manually on a computer or when the
card is formatted.
PLayBacK ModE MENU oPtIoNs
In playback mode, press the menu button
to open the menu.
UsB ModE
storage:
In this mode, video and photo files can be
accessed.
web camera:
in this mode the device can be used as a
USB camera.
charging:
Connect to the computer in this mode to
charge the camera only.
storage card (tf) preparation:
SD card requirements: minimum capacity of
8GB and CLASS10 or above.
INsErtING aNd
rEMoVING tHE sd card:
1. Insert the SD card into the dedicated slot
before turning on the device
2. To remove a Micro SD card from the
memory card slot, push the edge of the
card until it pops out.

BattEry cHarGING

Use a UsB cable to connect the unit
to a power source for charging.
1. Connect the charger to charge.
When charging, the red indicator light
is on and the full charge indicator
light is off.
2. Connect a 5V car charger, when the
car starts, it will automatically start
recording. 10 seconds after the
power is off, the video file will be
automatically saved and the device
will shut down.
Precautions:
1. Please insert the TF card before
recording.
2. Please use the attached USB car charger
to charge this device. This car charger
contains a 12V to 5V adapter. If the
output voltage is greater than 5V,
the product will be damaged.
EN