AgfaPhoto Realimove KM800 Benutzerhandbuch Seite 4

EN
BUttoNs & fUNctIoNs
dEscrIPtIoN:
PowEr BUttoN
1 - switch on function
Turn on the device by long pressing the
power button. When the device is on, long
press the power button to automatically
save video files or set various data and
execute the shutdown action.
2 - turning off the screen
Short press this key to turn off the screen
oK KEy
1: recording function
In video mode, short press this button to
start recording, short press again to stop
recording
2: camera function
In camera mode, short press this button to
take a photo
3: file playback function
In playback mode, short press this button
to play/pause a video file
4: confirm function
Use it as a "confirm button" in settings.
MENU KEy
1: Menu function
In standby mode, short press the menu
key to open the menu, short press again
to exit
ModE KEy
Used to switch between the different
modes of the camera, the switching
sequence is as follows: video mode
> photo mode > playback mode
UP BUttoN aNd dowN BUttoNs
Scroll through the menus with the up and
down buttons
rEsEt BUttoN
If the product is not working properly, you
can press this button using a paper clip or
pin to reset it.
dasH caM fEatUrEs
LooP rEcordING
Stores video recordings of 1, 2 or 5 minutes
in the SD card. When the SD card is full, the
latest video overwrites the earliest video.
ParKING MoNItorING
In parking mode, the device will automatically
turn on and start recording when a collision
or impact is detected.
G-sENsor
When the gravity sensing function is turned
on and a collision is detected, the dashcam
will automatically protect the current video
to prevent it from being overwritten by the
loop recording.