Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Metering
This se�ng allows you to adjust the metering point.
1.
Press MENU bu�on to enter the se�ngs menu of the photo mode.
2.
Press Up / Down bu�ons to select Metering in the se�ngs menu and then MENU bu�on to enter the submenu.
3.
Press Up / Down bu�ons to select an op�on: Center / Mul� / Spot.
4.
Press MENU bu�on to confirm your choice and then MODE bu�on to return to photo mode.
Macro
This se�ng allows you to adjust the photo shoo�ng of a more or less distant (10cm
hyperfocal distance.
Note:
The camera is by default in Far shoo�ng mode.
1.
Press MENU bu�on to enter the se�ngs menu of the photo mode.
Press Up / Down bu�ons to select Macro in the se�ngs menu and then MENU bu�on to enter the submenu.
2.
3.
Press Up / Down bu�ons to choose between: On (= Macro shoo�ng
4.
Press MENU bu�on to confirm your choice and then MODE bu�on to return to photo mode.
General setup of the camera
The camera setup menu can be accessed in all modes by pressing MENU bu�on once and then pressing R ight bu�on, and is
mainly used to modify certain se�ngs specific to the camera opera�on.
Beep sound
This se�ng allows you to switch the sound of the camera bu�ons on or off.
1.
Press MENU bu�on and then Right bu�on to enter the setup menu of the camera.
2.
Press Up / Down bu�ons to select Beep in the setup menu and then MENU bu�on to enter the submenu.
3.
Press Up / Down bu�ons to choose between: On / Off.
4.
Press MENU bu�on to confirm your choice and then MODE bu�on to return to photo mode.
Frequency
This se�ng allows you to reduce flickering and avoid strips effect when photo shoo�ng.
Note: the default frequency se�ng is 60Hz.
1.
Press MENU bu�on and then Right bu�on to enter the setup menu of the camera.
2.
Press Up / Down bu�ons to select Frequency in the setup menu and then MENU bu�on to enter the submenu.
25cm) object by focusing the right
) / Off (= Far shoo�ng
).
Werbung
Inhaltsverzeichnis
