AgfaPhoto Realimove KM600 Benutzerhandbuch Seite 4

EN
NOtEs:
- Do not install the camera in a location
that will block your view of the road,
interfere with the mirror or controls,
or obstruct the airbag.
- We recommend installing the camera
above the center of the dashboard
near the rear-view mirror.
- Clean the windshield area where
you will be mounting the dashcam
with an alcohol/cleaning wipe before
attaching the suction cup mount.
- Clean the lens on a regular basis.
- When adjusting the viewing angle,
aim the camera slightly towards
the ground with less sky in view to
reduce lens glare when your vehicle is
facing the sun.
pOWErINg ON &
cHArgINg yOUr
dAsHcAM
In order to power on your dashcam,
you can plug one end of the supplied
car charger into the cigarette lighter
socket of your vehicle, and then
connect the other end to the USB port
on your dashcam.
Once plugged in, your dashcam turns
on and starts recording automatically
when the vehicle's engine is started.
When the car's engine is turned off,
the dashcam will turn off shortly
afterwards.
You can also short press the power
button to manually turn on or long
press the power button to turn off
your dash cam if you are using your
dashcam independently of your vehicle.