AgfaPhoto Realimove KM600 Benutzerhandbuch Seite 3

INsErtINg A MEMOry
cArd INtO yOUr
dAsHcAM
A Micro SD memory card is required
in order to store recorded photos and
videos.
Before using your dashcam, insert a
Micro SD Memory Card into the Micro
SD card slot.
Your dashcam supports Micro
SD Memory Cards of up to 32GB
in capacity. To ensure smooth
performance it is recommended to use
a memory card rated class 6 or above,
with at least 8GB in capacity.
We do not guarantee compatibility with
Micro SD cards from all manufacturers.
Only use Micro SD cards from reliable
sources.
It is recommended to use a new
or a formatted card. Formatting,
permanently deletes all data on the
memory card, so be sure to copy the
data, you want to keep, to another
storage device before formatting.
To remove a Micro SD card from the
memory card slot, push the edge of the
card until it pops out.
MOUNtINg tHE
dAsHcAM tO A
WINdsHIEld
Attach the dashcam to your vehicle's
windshield with the included suction
cup mount.
1. Slide the windshield mount bracket
hook into the bracket slot on the top
of the dashcam. Make sure it slides
in place so that the suction cup
mount is securely attached to your
dashcam.
2. Remove the clear protective film
from the suction cup and press the
suction cup against the windshield,
then flip the locking lever up so the
suction mount is locked into place.
EN