Signs And Symbols; Proper Intended Use; Safety Instructions - RECA Ultra R-Star Bedienungsanleitung

GB ORIGINAL-BEDIENUNGSANLEITUNG
Unpack all parts and check that everything is there and that nothing is damaged. Do
not use damaged products. If you find damage on the product, contact your dealer.
These operating instructions contain important information for the first use and
normal operation of this product, referred to in the following text simply as lamp
or product.
Read this manual carefully before using the lamp for the first time and proceed
accordingly.
Keep these operating instructions for future use or for the reference of future users.
Failure to follow the operating instructions and safety instructions may result in
damage to the product and hazards (injuries) for the operator and other persons.
The operating instructions refer to applicable standards and regulations of the Euro-
pean Union. Please also adhere to the laws and guidelines specific to your country.

SIGNS AND SYMBOLS

Please take note of the following symbols and words used in the operating instruc-
tions, on the product and on the packaging.
= Information / Useful additional information about the product
= Note / This note warns you of possible damage of all kinds
= Warning / Attention – Danger! May result in serious injury or death
Class 2 equipment
Class 3 equipment
Indoor use only
Conforms to European directives
Do not look into the lamp
Waste Electrical and Electronic
Equipment (WEEE-Guideline)

PROPER INTENDED USE

The product serves as a mobile light source for working environments, open spaces,
etc., and is not intended for use in other applications. The product can be set down,
hung or carried by the handle (if fitted). The product is intended exclusively for
private household use and not for commercial use. Not suitable for household room
lighting.
• Information for the light and mains adapter as well as mains voltage on the
socket must match with the type plate
• Do not use the product if there is damage to the housing, plug, cable or mains
adapter. Contact your local authorised specialist or the service address of the
manufacturer
• Ensure that the connection cable is not pulled taut and that it does not come into
contact with sharp objects, chemicals or solvents
• Do not open or modify the product! Repair work shall only be carried out by the
manufacturer or by a service technician appointed by the manufacturer or by a
similarly qualified person
• Keep the product and the packaging away from children. This product is not a
toy. Children should be supervised in order to ensure that they do not play with
the product
• The LED light source cannot be replaced. When the LED comes to the end of its
service life, the complete lamp must be replaced
• The LED cover cannot be replaced. If the cover is damaged, the product must
be disposed of.
• All illuminated objects must be at least 10cm away from the light
• The lamp may only be used in accordance with the intended use
• Never expose the product to extreme conditions (extreme heat/cold)
• The product is not a toy to be played with - keep out of reach of children
• Always keep the product dry
• Do not throw or drop
• Use only in original condition
• Do not use while still in packaging
• Turn off after use

SAFETY INSTRUCTIONS

Avoid eye injuries - Never look directly
into the beam of light or shine it into
other people's faces. If this occurs for too
Read the operating instructions
carefully before use!
Minimum distance from
lighted objects
Energy efficiency level 6