Cleaning; Cleaning & Maintenance - Lacor 69326 Gebrauchs- Und Instandhaltungsanleitung

8.- Remove the roaster, placing the side of the handle hooks (11) of the roaster in the slits at each
side of the bar. Raise the left side of the bar first and pull the bar removing the roast food
carefully.
Convection function
1- Position the
heat selector
air inside the oven.
Oven function
1.- Place the mesh (9) or oven tray (8)in the desired position.
2.- Introduce the recipient with the food to be cooked on to the mesh or the food directly into the
tray.
3.- Turn the timer to select the desired time.
4.- Turn the temperature switch to the desired temperature.
5.- When you finish, remove the tray or mesh using the handle (10) supplied and leave the oven
door half-open to cool the oven.
Multifunction
All the heating and convection/roaster functions can be used individually or together.
1.- Never use any chemical or abrasive products. Do not use a brush or any other type of utensils
which could damage the different parts and surface of the slicer.
2.- Use a damp cloth with detergent to clean the machine and then dry it. Make sure to clean the
machine completely every day.
ATTENTION:
3.- Do not put the machine directly into any container with water in it.
This machine is not waterproof.
4.- If the apparatus is not maintained in a good state of cleanliness, its surface could be degraded
and affect the lifespan of the apparatus and lead to a dangerous situation.
5.- For easy cleaning of the cavity walls, half lemon put in a container, add 300 ml. water and set
heat on high for 10 minutes. Then, wipe the microwave with a soft and dry cloth.
34
(3) in the convection position and the ventilator will start to move the
CLEANING / MAINTENANCE