Black & Decker KX2001 Handbuch Seite 8

ENGLISH
Use a medium temperature setting for welding plastics,
u
bending plastic pipes, and loosening tight nuts and
screws.
Use a high temperature setting for removing paints and
u
lacquers, and soldering plumbing joints.
If you are unsure about using this tool on a particular
u
material, start with a low temperature setting and perform
a test on scrap material.
Hands free use (fig. B)
The tool has stand locations (4) to facilitate hands free use.
Place the tool with the nozzle up on a surface where it
u
cannot be tipped over.
Secure the cable to prevent pulling the tool off the stand
u
locations (4).
Warning! Always point the tool away from yourself or other
persons. Do not touch the nozzle. Take care that no material
drops into the nozzle.
Paint stripping
Direct the hot air at the working area to heat up the paint.
u
Do not burn the paint. Keep the nozzle at least 25 mm
u
from the surface.
When the paint softens, remove the paint using a scraper.
u
Scrape the softened paint immediately or it will harden
again.
Scrape with the grain of the wood wherever possible.
u
Do not allow paint and debris to collect on the scraper.
u
When scraping from a vertical position, scrape downwards
u
to prevent the paint from falling back into the nozzle.
When stripping paint from a surface next to glass, take the
u
necessary measures to protect the glass from the heat.
Warning! Use a glass protector nozzle when stripping paint
from metal or wood framed windows.
Dispose of all paint debris safely and make sure that the
u
work area is thoroughly clean after use.
Cooling down
During use, the nozzle of the tool becomes extremely hot.
After switching off, leave the tool to cool down for at least 30
minutes.
Place the tool with the nozzle up on a surface where it
u
cannot be tipped over.
Maintenance
Your Black & Decker appliance has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper care
and regular cleaning of the appliance.
Warning! Switch off and unplug the appliance and allow it to
cool down before doing any maintenance on the appliance.
8
(Original instructions)
Regularly clean the ventilation slots in your appliance
u
using a soft brush or dry cloth.
To clean the appliance, use only mild soap and a damp
u
cloth. Do not use any abrasive or solvent-based cleaner.
Never let any liquid get inside the appliance and never
immerse any part of the appliance into liquid.
Mains plug replacement (U.K. & Ireland only)
If a new mains plug needs to be fitted:
Safely dispose of the old plug.
u
Connect the brown lead to the live terminal in the new
u
plug.
Connect the blue lead to the neutral terminal.
u
Warning! No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 13 A.
Protecting the environment
Z
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection. z
Separate collection of used products and packag-
ing allows materials to be recycled and used
again. Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of elec-
trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and
recycling of Black & Decker products once they have reached
the end of their working life. To take advantage of this service
please return your product to any authorised repair agent who
will collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local Black & Decker office at
the address indicated in this manual. Alternatively, a list of
authorised Black & Decker repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com