Finer Form FF-TB022302 Benutzerhandbuch Seite 11

Step 5
a. Use hex screws (22) and washers (20) to attach knee pads to adjustment frame (10)
and tighten.
Step 6
a. Rotary knob (26) into front vertical frame (2). It need not be screwed in very
deeply.
b. Insert adjustment frame (10) into front frame (2) and use rotary knob (26) to
adjust height of adjustment frame.
c. Insert handles (12) into the openings on adjustment frame (10) as shown.
If product does not sit flat
after assembly, adjust
rotating foot knobs to level.
9