Inhaltsverzeichnis
Werbung
Manual
JES-301E1/V & JES-301E1OS/V
15.
Zertifikate Klemmenkasten 8118
BA_DE_JES301E1_E1OS_v4.0
–––––––––––––––
[ 36 / 44 ]
15.
Certificates junction box 8118
UNCERTIFIED TRANSLATION
Physikalisch-Technische Bundesanstalt
Braunschweig and Berlin
EC-TYPE-EXAMINATION CERTIFICATE
(1)
(2)
Equipment and Protective Systems Intended for Use in
Potentially Explosive Atmospheres - Directive 94/9/EC
(3)
EC Type Examination Certificate Number
(4)
Equipment:
Junction and Terminal Boxes Type 8118/...-...
(5)
Manufacturer:
R. Stahl Schaltgeräte GmbH
(6)
Address:
Bergstraße 2, D-74653 Künzelsau
(7)
This equipment and any acceptable variation thereto are specified in the schedule to this
certificate.
(8)
The Physikalisch-Technische Bundesanstalt, notified body No. 0102 in accordance with Article
9 of the Council Directive 94/9/EC of 23 March 1994, certifies that this equipment has been
found to comply with the Essential Health and Safety Requirements relating to the design and
construction of equipment and protective systems intended for use in potentially explosive
atmospheres, given in Annex II to the Directive.
The examination and test results are recorded in the confidential report PTB Ex 99-30041.
(9)
Compliance with the Essential Health and Safety Requirements has been assured by
compliance with:
EN 50 014:1997
(10) If "X" is placed after the certificate number, it indicates that the equipment is subject to special
conditions for safe use specified in the schedule to this certificate.
(11) This EC-type-examination Certificate relates only to the design and construction of the
specified equipment in accordance with Directive 94/9/EC. Further requirements of this
Directive apply to the manufacture and supply of this equipment.
(12) The marking of the equipment shall include the following:
II 2 G
EEx e II T6/T5 or EEx ia/ib IIA/IIB/IIC T6/T5
Zertifizierungsstelle Explosionsschutz
By order:
signed: U. Engel
L.S.
Dr.-Ing. U. Engel
Regierungsdirektor
EC-type-examination Certificates without signature and official stamp shall not be valid. The certificates may be circulated
only without alteration. Extracts or alterations are subject to approval by the Physikalisch-Technische Bundesanstalt.
In case of dispute, the German text shall prevail.
Physikalisch-Technische Bundesanstalt Bundesallee 100 D-38116 Braunschweig
–––––––––––––––––
PTB 99 ATEX 3103
EN 50 019:1994
EN 50 020:1994
Braunschweig, 19 April 1999
Page 1/2
Werbung
Inhaltsverzeichnis
