Commend ID5 FBS Kurzanleitung

ID5 FBS
Flush mount box for an Intercom station of the Indoor series.
Mounting
• For mounting of an Indoor series Intercom station to the flush mount box ID5 FBS, the gypsum/
panel mount kit ID5 FB is required.
• For information on mounting, see the supplied installation instructions.
Recommended mounting height and position
• Mount the upper edge of the Intercom station approx. 1,650 mm (65 in) from the finished floor.
Adapt the mounting height to the individual needs.
• For a barrier-free accessibility, it is recommended to mount the Intercom station with enough space
to walls or corners.
• When mounting the Intercom station, pay attention to the correct camera angle in terms of
accessibility, so that wheelchair users and children can be detected by the camera:
100° (vertical) x 125° (horizontal)
Dimensions
Measuring units in mm (in), not to scale!
92.5 (3.64)
Extent of supply
• Flush mount box E22
• Signal cover
• Installation instructions
• Short reference
Mounting instructions
• This box shall be installed by trained and qualified personnel only.
• Do not install this kit on unstable walls or on surfaces, which cannot support the weight of the
device.
• Protect the mounting box during plaster work by using the supplied signal cover.
• No water may penetrate into the mounting box. Therefore, make sure the mounting box is water-
proof.
Manufacturer's reference
For technical specifications, see the respective manual.
For the latest software and documentation, visit: www.commend.com
Keep this description in safe custody.
Type: D-BZ-ID5-FBS, Version: 1.0/0318 Commend International GmbH, Saalachstraße 51, A-5020 Salzburg – www.commend.com
ID5 FBS
Flush mount box for an Intercom station of the Indoor series.
Mounting
• For mounting of an Indoor series Intercom station to the ID5 FBS, the gypsum/panel mount kit
ID5 FB is required.
• For information on mounting, see the supplied installation instructions.
Recommended mounting height and position
• Mount the upper edge of the Intercom station approx. 1,650 mm (65 in) from the finished floor.
Adapt the mounting height to the individual needs.
• For a barrier-free accessibility, it is recommended to mount the Intercom station with enough space
to walls or corners.
• When mounting the Intercom station, pay attention to the correct camera angle in terms of
accessibility, so that wheelchair users and children can be detected by the camera:
100° (vertical) x 125° (horizontal)
Dimensions
Measuring units in mm (in), not to scale!
92.5 (3.64)
Extent of supply
• Flush mount box E22
• Signal cover
• Installation instructions
• Short reference
Mounting instructions
• This box shall be installed by trained and qualified personnel only.
• Do not install this kit on unstable walls or on surfaces, which cannot support the weight of the
device.
• Protect the mounting box during plaster work by using the supplied signal cover.
• No water may penetrate into the mounting box. Therefore, make sure the mounting box is water-
proof.
Manufacturer's reference
For technical specifications, see the respective manual.
For the latest software and documentation, visit: www.commend.com
Keep this description in safe custody.
Type: D-BZ-ID5-FBS, Version: 1.0/0318 Commend International GmbH, Saalachstraße 51, A-5020 Salzburg – www.commend.com