Noqon NSP Serie Montage- Und Bedienungsanleitung Seite 88

88 NOQON - NSP / NST / NSC
Attention!
In order to protect against cable fires, it is mandatory to install a fuse between the inverter
and the battey in the PLUS line!
Install the fuse as close to the battery side as possible.
Note!
Sparking!
When connecting the input DC voltage source, sparking occurs due to the charging of the
internal capacitors.
Grounding
The Noqon inverter has an M5 earth bolt. This is used to connect the inverter to the vehicle
ground when used in vehicles.
The grounding of the two output sockets (230V) are already internally connected to the M5
grounding bolt.
Warning!
Danger of electric shock!
The device is basically equipped with safety features that can prevent dangerous electric
shocks.
However, in order to ensure the highest possible safety in operation, it is imperative that
the grounding connection of the inverter is connected to a protective earthing system
(usually green-yellow cable) in each case.