Focus Adjustment - Faminode H2 Bedienungsanleitung

TURN THE PROJECTOR ON/OFF
When the projector is connected to the power source, it will enter standby mode
and the signal indicator will be red.
Power on: Press the power key on the body or remote control; the indicator will
turn blue and enter working mode.
Power off: In working mode, press the power key on the body or remote control;
the indicator will change from blue to red and the projector will turn off.

FOCUS ADJUSTMENT

Focus Adjustment
Turn the trackwheel clockwise to the limit, then slowly rotate it counterclockwise.
At the same time, carefully observe the pixels on the screen. When the image
particles are clearest, the pixels on the screen are the best focus of the lens.
Focusing dial
Keystone
If a projected picture has keystone distortion, correct the image using keystone
adjustment. The image will be in a trapezoidal shape if the screen or projector is
not level. Rotate the keystone trackwheel clockwise or counterclockwise to adjust
the position. Reposition the projector to improve its angle to the screen. The
circumference of the image may still not be in focus.
Keystone
If you are unable to use the keystone adjustment function to correct the trapezoid
distortion, lower the projector to the center of the screen vertically.
Projector
Height
Screen
Screen
Projector
Height
Height-feet
Adjustment
8