Bang & Olufsen BeoVision MX 4200 Bedienungsanleitung Seite 25

Flash-programming of the M2 processor
Tools needed for fl ash-programming
Flash-programming
Note!
It is not possible to built-in a Set-top-Box Controller module in the chassis.
The Set-top-Box Controller is software which has to be fl ash-programmed into
the M2 processor.
For this purpose Bang & Olufsen has developed a "Flash Tool" which is a PC/LapTop
application for installation/updating the STB-C software.
- PC/LapTop with Bang & Olufsen "Flash Tool" application (can be downloaded from
the Retail System).
- Cable kit no. 3375397.
Installation/Updating STB-C software
- Start the "Flash Tool" and follow the on-screen instruction on the PC.
Software versions can be checked in the "Service Menu".
Flash-programming, English 2.23