Product Description And Specifications; Product Features; Technical Data; Noise/Vibration Information - Bosch GBM 1600 RE Professional Originalbetriebsanleitung

12 | English
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is suitable for drilling in wood, metal, ceramic
and plastic.
The power tool is suitable for stirring construction materials
in powder form, such as mortar, plaster, adhesive and paints
and varnishes which do not contain solvents, as well as sim-
ilar substances.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Keyed chuck
(2) Auxiliary handle (insulated gripping surface)
Thread for auxiliary handle
(3)
(4) Carrying handle (insulated gripping surface)
(5) Lock-on button for on/off switch
(6) On/off switch
(7) Rotational direction switch
(8) Handle (insulated gripping surface)
a)
(9) Chuck key
(10) Securing screw for keyed chuck
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Rotary drill
Article number
Rated power input
No-load speed
Rated torque
Spindle collar diameter
Max. drilling diameter
– Steel
– Wood
– Aluminium
Chuck capacity
Clockwise/anti-clockwise
Maximum stirrer paddle dia-
meter
1 609 92A 7GL | (26.07.2022)
Rotary drill
Weight according to
EPTA-Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.

Noise/vibration information

Noise emission values determined according to
EN 62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 85 dB(A); sound power level
96 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-1:
Drilling in metal: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
GBM 1600 RE
and organising workflows correctly.
3 601 AB0 0..
Assembly
W 850
-1
min 630
u
Nm 11
mm 43
Auxiliary Handle (see figure A)
u
mm 16
mm 40
Screw the auxiliary handle (2) into the thread (3) on the mo-
mm 16 tor housing.
mm 3–16
Carrying handle (see figure A)
●
The carrying handle (4) can be continuously rotated through
mm 160
360°.
(triax vector sum) and uncertainty K
h
2
<2.5 m/s , K = 1.5 m/s
h
Pull the plug out of the socket before carrying out any
work on the power tool.
Do not operate your power tool without the auxiliary
handle (2).
GBM 1600 RE
kg 3.0
/ II
2
Bosch Power Tools