Page EN-14
Commissioning and operation
Heating water
CAUTION
Risk of scalding!
If the water tank is overfi lled,
hot water can spurt out dur-
ing boiling.
■ Do not fi ll the water tank
above the MAX mark.
■ Do not open the lid during
operation.
Risk of burns!
The water tank becomes hot
during use!
■ Only hold the water tank by
its handle.
1. Insert the mains plug (5) into a
properly installed socket.
2. Depress the lid opener (3) to
open the lid.
(3)
3. Fill the water tank with fresh,
cold tap water (min. 0.5 to max
1.7 litres, 1.7 l for first use.
4. Push the lid (2) closed until
you clearly hear it click into
place.
(2)