Bosch Rexroth LU 2/P Montageanleitung Seite 47

1 About this documentation
1.1 Validity of the documentation
This documentation applies to the following products:
• Automatic lubrication unit LU 2/P-24V-3L, 3 842 562 921
• Assembly kit LU 2/P, 3 842 562 923
• Hydraulic block LU 2/M-2 for 2 dosing valves, 3 842 562 927
• Hydraulic block LU 2/M-4 for 4 dosing valves, 3 842 562 928
• Hydraulic block LU 2/M-6 for 6 dosing valves, 3 842 562 929
• Hydraulic block LU 2/M-8 for 8 dosing valves, 3 842 562 930
• Dosing valve set LU 2V-0.03-D4-1/8 (0.03 cm³), 3 842 562 947
• Dosing valve set LU 2V-0.06-D4-1/8 (0.06 cm³), 3 842 562 931
• Dosing valve set LU 2V-0.10-D4-1/8 (0.10 cm³), 3 842 562 932
• Dosing valve set LU 2V-0.16-D4-1/8 (0.16 cm³), 3 842 562 933
• Dosing valve set LU 2V-0.20-D4-1/8 (0.20 cm³), 3 842 562 934
• Dosing valve set LU 2V-0.30-D4-1/8 (0.30 cm³), 3 842 562 935
• Dosing valve set LU 2V-0.50-D4-1/8 (0.50 cm³), 3 842 562 943
• Dosing valve set LU 2V-0.03-1/8-1/8 (0.03 cm³), 3 842 562 948
• Dosing valve set LU 2V-0.06-1/8-1/8 (0.06 cm³), 3 842 562 936
• Dosing valve set LU 2V-0.10-1/8-1/8 (0.10 cm³), 3 842 562 937
• Dosing valve set LU 2V-0.16-1/8-1/8 (0.16 cm³), 3 842 562 938
• Dosing valve set LU 2V-0.20-1/8-1/8 (0.20 cm³), 3 842 562 939
• Dosing valve set LU 2V-0.30-1/8-1/8 (0.30 cm³), 3 842 562 940
• Dosing valve set LU 2V-0.50-1/8-1/8 (0.50 cm³), 3 842 562 944
• Adapter set AS 2/C-100, -250, 3 842 543 483
• Adapter set AS 2/C-400, -700, 3 842 543 484
• Adapter set AS 2/R-300, -700, 3 842 543 485
• Adapter set AS 2/R-1200, -2200, 3 842 543 486
• Adapter set AS 2/R-V, 3 842 543 487
• PA hose set D4x3/L=20m, 3 842 562 925
• Steel tube set D=4mm/7x3m, 3 842 562 926
• Oil 5l Structovis GHD, 3 842 562 941 (observe the manufacturer's safety
data sheet, see Table 1 on page 6)
This documentation is intended for fi tters, operators, service engineers and system
owners.
This documentation contains important information relating to the safe and
proper assembly, transportation, commissioning, operation, use, maintenance and
disassembly of the product, and on how to rectify simple faults yourself.

Read this documentation in full prior to working with the product, particularly
section 2 "Safety instructions" and section 3 "General notes on property and
product damage".

This also applies to the documents listed in Table 1 on page 6.
About this documentation
3 842 557 976/2020-08, MIT: LU 2/P-24V-3L, Bosch Rexroth AG
5/42