Note
For audio equipment, fi rst press the Shift button (
TV/CD button (
STB/TAPE button (
DVD BD/TUNER button (
AUX/AMP button (
3) Using the numeric buttons, enter
the code 1 0 0 1 for TV,
the code 3 0 0 1 for STB,
the code 5 0 0 1 for DVD/Blu-ray,
the code 6 0 0 1 for CD,
the code 7 0 0 1 for TAPE,
the code 8 0 0 1 for TUNER or
the code 9 0 0 1 for AMP.
The signal LED ( ) fl ashes twice in order to confi rm that the search mode has
been activated.
4) For TV, STB and AMP, hold the standby button ( ); for DVD/Blu-ray, CD and
TAPE, hold the stop button ( ) or for the TUNER, hold button 2 (
RC 10380 pressed until the equipment switches off; for DVD/Blu-ray, CD or TAPE
until playback stops or with the TUNER, until it switches to the next programme.
This step may take several minutes.
5) As soon as the equipment responds, press the OK button (
programming and hold it until the signal LED ( ) fl ashes twice.
6) Test the functionality of your remote control using the standby button ( ) and then
with the buttons 1 to 34.
7) If the equipment responds properly to all functions, your RC 10380 is correctly
programmed and can be used.
Note
:
It could happen, that during the search process, the RC 10380 fi nds several codes to
which your TV set responds, but where all buttons do not function for each code. In
this case, the search process should be re-started (steps 2 to 7) until you obtain the
best code. Re-starting the search process starts at the last saved programming.
Zapman RC10380, Innenteil für BA, 105x210 CS6.indd 5
Zapman RC10380, Innenteil für BA, 105x210 CS6.indd 5
:
/
) for CD,
TV
CD
/
) for TAPE,
STB
TAPE
DVD BD
/
) for AMP
AUX
AMP
Note on environmental protection
After the implementation of the European Directive 2002/96/EU in the national legal system, the
following applies:
Electrical and electronic devices may not be disposed of with domestic waste.Consumers are obliged
by law to return electrical and electronic devices at the end of their service lives to the public collecting
points set up for this purpose or point of sale. Details to this are defi ned by the national law of the
respective country. This symbol on the product, the instruction manual or the package indicates that a
product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old
devices, you are making an important contribution to protecting our environment.
) and then the
SHIFT
/
) for TUNER or
TUNER
5
2
) of your
) to confi rm the
OK
19.03.2013 14:37:55
19.03.2013 14:37:55