Gb Operating Instructions; Manual Programming - Zapman Universal Rc 10380 Bedienungsanleitung

GB
We congratulate you on the purchase of a zapman universal remote control. Your new
remote control replaces the original remote control of your TV, the remote control of
your satellite receiver or DVB-T / cable box (also referred to as STB in the following)
as well as that of your Blu-ray or DVD/Blu-ray player / recorder. Moreover, with your
RC 10380 you can also operate your audio equipment such as CD player (CD),
cassette recorder (TAPE), radio or tuner (TUNER) or an amplifi er (AMP).
Read all instructions carefully and retain the instructions for reference at a later date.

Manual Programming

1) Switch on your TV, satellite receiver or your DVB-T / cable box (STB), your DVD/
Blu-ray player or recorder (DVD/Blu-ray) and your audio equipment.
2) Page to the brand of your equipment „TV", „STB", „DVD BD", „CD", „TAPE",
„TUNER" or „AMP" in the list of codes. One or more 4-digit codes are displayed for
each brand.
3) Press and hold the (
you would like to programme, until the signal LED ( ) fl ashes twice.
Note
For audio equipment, fi rst press the (Shift Symbol) button and then the
TV/CD button (
STB/TAPE button (
DVD BD/TUNER button (
AUX/AMP button (
4) Use the number keys to enter the fi rst four-digit code from the code list for the
brand that you have selected. The signal LED ( ) fl ashes twice to indicate that the
code has been accepted.
5) Test the functionality of your remote control using the standby button ( ) and then
with the buttons 1 to 34.
6) If the equipment does not respond or only partially to the button commands, repeat
the steps 3 to 5 using the next code from the list of codes.
7) If the equipment responds properly to all functions, your RC 10380 is programmed
correctly and can be used. Please make a note of the code used for reference.
My programming codes to use:
TV
Automatic search feature
Alternatively, or if either in case of manual programming or with automatic
programming, the correct code for your equipment cannot be found, you may use the
automatic search feature.
1) Switch on your TV, satellite receiver or your DVB-T / cable box (STB), your DVD/
Blu-ray player or recorder (DVD/Blu-ray) and your audio equipment.
2) Press and hold the TV (
depending on the level that you wish to programme until the signal LED ( )
fl ashes twice.
Zapman RC10380, Innenteil für BA, 105x210 CS6.indd 4 Zapman RC10380, Innenteil für BA, 105x210 CS6.indd 4
OPERATING INSTRUCTIONS
RC 10380 universal remote control
), ( ), (
TV STB
:
/ ) for CD,
TV CD
/ ) for TAPE,
STB TAPE
DVD BD
/ ) for AMP
AMP
AUX
STB DVD/BD AUX
), STB (
TV
) or ( ) button depending on the level that
DVD BD AUX
/ ) for TUNER or
TUNER
CD TAPE
), DVD BD (
STB DVD BD
4
TUNER AMP
) or AUX ( ) button
AUX
19.03.2013 14:37:48 19.03.2013 14:37:48