Scope Of Delivery; Installation Requirements; Electrical Connection - FRESKO V8 Gebrauchsanweisung

Note:
If possible, keep the original packaging during the warranty period so that the device can be properly
packed for return in the event of a warranty claim.

Scope of Delivery

The appliance is supplied with the following components as standard:
1 x Vacuum Sealer
1 x Vacuum Tube
20 x Vacuum Bags (200x300 mm)
Check the package for completeness and for signs of visible damage.
If the consignment is incomplete or damaged due to defective packaging or carriage, please contact us.

Installation Requirements

For safe and trouble-free operation of the device, the set-up location must fulfill the following requirements:
When setting it up, place the appliance on a firm, flat and horizontal surface.
Do not place the device in a hot, wet or extremely damp environment or in the vicinity of flammable
materials.
The mains power socket must be easily accessible, so that the power cable can be easily disconnected in
the event of an emergency.

Electrical Connection

Before connecting the device, compare the connection data (voltage and frequency) on the type plate
with those of your power supply. This data must match to prevent damage to the device.
Make sure that the power cord is undamaged and does not run over hot surfaces and/or sharp edges.
Make sure that the power cord is not taut or bent.
Do not let the power cable hang over edges (trip wire effect).
Insert the plug into the mains power socket.
MOIST Button
SEAL Button
/EXTERNAL V ACUUM Button
DRY Button
Circle Progress Bar
Removable Drip Tray
Vac Slot Cleaning Indicator Light
Opening
21
Power Cord Storage Case