Story MONARCH 10'4 Bedienungsanleitung Seite 17

EN
INSTRUCTION
Introduction for care and storage of the SUP
MAINTENANCE SUP BOARD
Clean and check the SUP board and all accessories. Use a mild, non scouring cleanser.
Make sure the SUP board is completely dry before placing it in the backpack. Otherwise
this may cause mold, foul odor and the skin/hull or the inside chambers of the SUP board
will su er from water damage.
REPAIRS:
Although the SUP board has been manufactured of a reinforced and tough material, it is
still possible to cause holes or cracks when the SUP board is handled improperly. For the
repair of a small damage a repair kit is included.
Prepare a round patch with repair material with correct measurements.
Clean the repair material and the area around the leak with alcohol.
Apply 3 thin, even coats of glue to both the surface of the board and the repair material.
Wait 5 minutes between each coat.
After the 3rd coat, wait 10-15 minutes before applying the repair material. Use a handrol-
ler to apply the repair material evenly. Pay special attention to the edges
Wait at least 24 hours before re-in ating.
17.