Before You Start - NiteBird SL3 Benutzerhandbuch

Pairing with the Gosund App
Note: Supports 2.4 GHz WiFi only.
1. Open the "Gosund" App and create
your Gosund account.
2. Turn on the light strip and put it
close to the router when pairing.
3. There are two ways you can add a
device.
One way is to tap "+" in the upper right
corner and select "Auto Scan" when your
phone has Bluetooth turned on.
The second way is to tap "+" in the upper
right corner to select "Add Manually" and
then select "Strip Light (Wi-Fi)".
Follow the App instructions to complete
the operation.

Before You Start

1. Install the light strip after it is
connected to the Gosund APP
successfully.
5