VEOHAUT BL-FS7-D Anleitung Seite 6

This Fan may be operated by the Manual Controls located on top of the unit (Figure 5) or
by the Remote Control (Figure 6).
TIMER BUTTON
SPEED BUTTON
OSCILLATION BUTTON
POWER BUTTON
Figure 5
1. PLACE THE FAN ON A FIRM AND LEVEL SURFACE.
2. PLUG THE CORD SET INTO AN OUTLET.
3. POWER BUTTON
Press this Button to switch on/switch o the fan.
4. SPEED BUTTON
You may adjust the Fan speed to the desired level,
(High) by pressing the Fan Speed Button. The light indicate speed state.
5. OSCILLATION BUTTON
Press the Oscillation Button to start and stop the oscillation function. The light indicate
oscillation state.
6. TIMER BUTTON
This Fan is equipped with a timer. The timer function allows the unit to be set to operate
for a length of time from 1 hour to 12 hours, in increments of a 1 hour. Continue pressing
the Timer Button to reach the desired time setting. To cancel timer, press Timer Button
until lights are extinguished.
7. LIGHT BUTTON
Press the Light Button to start and stop the Light function.
8. NIGHT BUTTON
Press the Night Button to immediately turn on night mode.
9. AFTER TURNING THE FAN OFF, UNPLUG THE UNIT FROM THE ELECTRICAL OUTLET.
OPERATION INSTRUCTION
POWER BUTTON
POWER
SPEED BUTTON
SPEED
TIMER BUTTON
4
OSCILLATION BUTTON
OSC
NIGHT BUTTON
TIMER LIGHT NIGHT
LIGHT BUTTON
Figure 6
(Low), (Medium), or