VEOHAUT BL-FS7-D Anleitung Seite 5

ASSEMBLY INSTRUCTIONS
1. Take out the fan body and the spare parts from the box. Assemble the Support Base
Halves by interlocking the bosses on Support Base B into the Boss Slots on Support Base
A. Screw Support Base with four screws (Figure 1)
Support Base A
Boss Slots
Boss Slots
Bosses Bosses
Support Base B
Figure 1
2. Pass the power cord through the Support Base.The alignment arrow on the Support
Base Assembly should align with the alignment arrow on the Motor Base (Figure 2 &
Figure 3).
Motor Base
Power Supply Cord
Support Base
Figure 2 Figure 3
3. To secure the Support Base Assembly to the Motor Base, hold the Motor Base in place
while turning the Support Base Assembly clockwise (towards to the locked symbol) until
it no longer turns and locks in place.(Figure 3)
4. Gently pull any excess slack of the Power Supply Cord and place it in the Wire Locating
Trough. (Figure 4)
Wire Locating Trough
Power Supply Cord
Figure 4
3