Battery Installation - MoMi GLOSSY Bedienungsanleitung

7. Slide the top of the music box through the hole in the seat cover and onto the footrest frame .Re-
verse the procedure above to remove the music box, attached the clips under the seat(8,9).(Notice the
orientation of the music box )
8. Clip the toy bar to each side of the bouncer franne(10). Pull the clip off to remove the toy bar.
ADJUSTABLE SEAT RESTRAIN
Place baby in the bouncer with the seat restraint positioned between his legs.
Fasten the buckles on both sides of the restraint, pressing until you hear a "click".
Make sure the seat restraint is secure by pulling it away from your baby's body. It
should remain fastened. Always use restraint system.
BATTERY INSTALLATION: Use a small Philips-head screwdriver to open the
battery compartment door on the music/vibration box. Insert the battery as in-
dicated inside the battery door and re-attached the battery compartment door
with screw.
CLEANING: Seat pad: Remove pad from frame. Fasten buckles on seat restraint machine wash cold
water, gentle cycle. No bleach. Tumble dry low heat. Toy bar and toys: Wipe clean with a damp cloth
and mild soap. Air dry. Frame: Wipe wire frame with soft clean cloth and mild soap.
MODULE BATTERIES: Remember that batteries are not included. It is up to the Customer to purchase
the appropriate batteries. The manufacturer recommends AA, 1.5 V alkaline batteries. Batteries should
be purchased and disposed of according to the information on the battery package. Do not leave the
module with batteries in the sun or in unsuitable conditions to prevent leakage or bursting of batter-
ies.
WARNING: Batteries that are low may cause the malfunction of the sensory module. If any of the
functions cease to work, install new batteries immediately.
12 EN