Remote Control - Symbo D410 Bedienungsanleitung

PRODUCT DIAGRAM

Remote control

1. Button ,,CLEAN"
Press this buttot to start cleaning in selected mode.
Press this button to make the robot stop when it's cleaning.
2. Directional buttons
A. Button "▲"
Press this button to increase number in scheduling or clock mode. Press
this button to make robot move forward in selected mode or make robot
stop when robot is moving forward.
B. Button "▼"
Press this button to decrease number in scheduling or clock mode. Press to
make robot move backward for little step in selected mode.
C. Button "◄"
Press this button to exchange from minute to hour in scheduling or clock
mode. Press this button to make robot turn left.
D. Button "►"
Press this button to exchange from hour to minute in scheduling or clock
mode. Press this button to make robot turn right.
3. Button ,,PLAN"
Press this button to enter scheduling mode when in selected mode. Press
this button to confirm scheduling in scheduling mode.
4. Button ,,CLOCK"
Press this button to enter clock mode when in selected mode. Press this
button to confirm clock setting in clock mode.
5. Button ,,SPIRAL"
Press this button to make robot start spot cleaning.
6. Button ,,HOME"
Press this button to return robot to charging home base.
7. Button ,,EDGE"
Press this button to make robot clean along wall.
Note:
• Install two AAA type batteries into the remote.
• Take out the batteries if the remote control is not used for long time.
5