Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installing the charging station
NOTE:
•
The charging station must be plugged into the mains supply after installing the
perimeter cable.
•
Install the charging station away from any water points or sprinkler systems.
•
The charging station must be at least 2 m from any electrical equipment that
could cause possible interferences, such as routers.
•
Do not place the charging station in a confined space. The robot mower may
encounter difficulties finding it (Figure 1).
•
An "IN" arrow is on the charging station (Figure 2). It indicates the direction the
base should be placed. The arrow must point towards the lawn.
Figure 1
Figure 2
9
EN
Werbung
Inhaltsverzeichnis
