ULTIMA TIG UT 03 Bedienungsanleitung Seite 31

INELCO A/S
Inelco A/S, Haandvaerkervej 6, DK-9690 Fjerritslev, Denmark
E-mail: inelco@inelco.com
CONTENTS
General machine description ................... ................... 1
Delivered with the machine .... ............................ ..... 2
Initial operation and transport ..................... ............... 3
Operational elements ................................. .............. 4
Safety procedures ........................................................... 5
Fastening of the electrode in the electrode holder... ...... 6
Setting the grinding angle ............................................... 7
Maintenance ................................................................... 8
Replacement of grinding wheel ....................................... 9
Field of application .............................. .................... 10
Technical specifications.............................. ............ 11
Training ................................... ............................... 12
Spare parts list .............................................................. 13
Drawing ................................................ ............... 14
ULTIMA-TIG /Neutra grinding liquid ........................15-30
IMPORTANT SAFETY INSTRUCTIONS
When installing and operating the machine the safety rules enclosed
SUPPLIER'S DIRECTIONS
should be read and strictly observed.
This instruction manual and the accompanying supplier's instruction for use must
be accessible at all times to staff engaged in the installation, operation and
maintenance of the machine.
ULTIMA-TIG
31/40