AVANCIS SKALA Sicherheits-, Installations- Und Betriebshandbuch Seite 12

AVANCIS SKALA PHOTOVOLTAIC MODULES
SAFETY, INSTALLATION AND OPERATION MANUAL
Content
General Information
Handling Safety
Installation Safety
Fire Safety
Mechanical Installation
Electrical Installation
Grounding of Back Rails
Mounting
"Hook-In" Mounting
"In-Joint" Mounting
Modules with variable length
Disclaimer of Liability
WARNING! ELECTRICAL EQUIPMENT
AVANCIS photovoltaic (PV) modules are designed for outdoor use to produce direct current (DC) electrical energy
from sunlight. This manual provides very important safety, installation and operating information. Please make sure
you are familiar with this information before handling, installing and operating the modules. Avoid all hazards when
handling, installing and operating PV modules.
The entire PV system must be designed,
installed and commissioned by a licensed
and qualified electrotechnical profes-
sional unless local codes determine oth-
erwise. Follow all applicable PV system
design guidelines, because these guide-
lines are not covered by this document.
AVANCIS recommends use of electrical
and mechanical components and tools
suitable and qualified for use in PV sys-
tems. Installation and operation of these
components are also not covered by this
document.
Edition:
1.2, February 2021
12
©2021 | AVANCIS GmbH | Solarstraße 3 | 04860 Torgau | Germany | service@avancis.de | www.skalafacade.com | February 2021
Please make sure you follow precisely the
instructions being given by the suppliers
of these components.
PV modules with a suspected problem
should be removed from the PV system
by a qualified person and be returned to
AVANCIS for inspection and subsequent
actions as described in the AVANCIS
WARRANTY FOR PHOTOVOLTAIC MOD-
ULE(S).
page
13
13
13
14
14
14
15
15
15
16
16
17
SKALA