Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
5. Installation of the LCD monitor and handle
Required Tools and Parts
1) Install the handle on the main body according to the direction shown in the
figure, and tighten the screws with an Allen wrench.
2) The back of the monitor should be aligned with the screw-sockets, and fixed
tightly with screws.
3) Cable connection: two black wires can be connected arbitrarily (for detecting
heart rate), and the other wire needs to be inserted into the 3.5 mm jack on the
back of the monitor (for detecting other data).
21
Werbung
